Super Line Markey Daiichi
-
Code:952656
A rotation system with automatic kink elimination, in which the spool rotates when the line is wound on the reel while the large-sized reel is secured firmly with a pipe sheet. A high-rigidity carbon body ensures ease of winding with high tension smoothly, thus making it possible to set a variety of rigs, ranging from large-sized spinning reels to bait reels. Supporting a wide range of spools, ranging from a single spool to a 600-m long coupled wide spool, thus eliminating frustration from kinks and making the line last long.
Quick Buy
Specification:
● Size: 426 × 150 × 55 mm (when in use); 212 × 200 × 55 mm (when folded)
● Weight: 330 g
● Spool maximum installation width: 80 mm; maximum diameter: 125 mm
● Supporting spinning reels (up to No. 10,000 class casting).
MADE IN JAPAN
Winding method:
1) Raise the folded arm and turn the arm fixing ring.
2) Secure the reel to the pipe sheet.
3) Pull the fixing pin up and turn it 90° to fix the rotating holder.
4) Set the spool.
(In order to suppress rotation blur, sandwich the asymmetric arms A and B according to the unevenness of the center of the various spools by referring to the illustration on the right-hand side as shown in Fig. 2)
* Loosen the adjustment screw and open the arm.
* Tighten the adjustment screw to close the arm.
5) Adjust the tension.
* Tightening the adjustment screw will increase the tension.
6) Connect the line to the spool of the reel.
7) Pull out the fixing pin and rotate it 90° to free the rotating holder.
8) The setting is completed at this stage. Wind at the same speed from beginning to end at once.